Epoxy Resin Coating – Marshalls Coach Hire

Location: Leighton  Buzzard

Company: Marshall Coaches

Sector: Coach Hire Operator

Size: 350m2

Job description:

This job came about from a recommendation from another coach company called Parrys Coaches for whom we did their workshop floor earlier in the summer (photos can be seen on face book)

Glen Marshall explained to us what he required –

The concrete in the existing MOT bay was extremely poor, the previous coating was worn and had almost disappeared.

We used a lighter grinder than the normal (a htc 500) instead of the omega 700 we normally use, to keep grind marks to a minimum with a soft substrate.

Glen decided to use a dark grey colour (similar to the one used on the previous Parrys Coaches job) followed by yellow and black demarcation lining around the two brake testers.

Epoxy Resin Coating – Medical Manufacturing Production Area

Location: Gloucester

Company: Platform 14

Sector: Medical manufacturing

Size: 550m2

Job description:

Darren at Platform14 called us in to prepare and coat their new additional  premises.

The existing concrete was in good condition apart from movement cracks over most of  it which we routed out and filled joints were topped up using sika flex.

We then applied two shades of blue high build epoxy resin coating platforms in the company’s corporate colours.

Considering the time of year the cure time was spot on without the need for additional heating.

Platform  14 and Darren were over the moon with the end result!


Below is a short video showing the floor preparation